Google Hirel Pages

Backplanes

Standard and fully customized backplane solutions. Standard product portfolio includes CPCI, MicroTCA, ATCA, VME, VME64X, VXS and VPX architectures.

Standard Backplanes

VME

For Enquiry Contact Us

VME

Features :

  Conforms to VME64 specification (ANSI/VITA 1-1994)
  True 3U/6U eurocard height.
  Excellent crosstalk performance, low ground shift.
  Automatic daisy chain of BG/IACK signals (mechanical or electronic) On-board, passive termination.
  Latchable service header for system reset, AC fail & system fail signals (Contact us for connector details and      pinning).
  Power on via M4 screw / 6.35mm faston tab (busbars available on request for larger slot sizes).
  Extended tails with shrouds on all J2 connectors.
  Conductive surface area top and bottom (chassis GND) for EMC-tight seal between backplane and subrack.
  High frequency coupling capacitors (10nF, 200V) in each slot.

VME64
For Enquiry Contact Us

VME64

Features :

  Conforms to VME64x specification (ANSI/VITA 1.1-1997).
  Fits within a 6U Eurocard.
  Available in 01-21 slot widths.
  Surface mount, active termination.
  Electronic, on-board, automatic daisy chain (BG/IACK signals).
  Power connections via busbars (M6 screws) and power studs (M3).
  Decoupling capacitors in every slot.
  All P2 connectors long tail / gold-plated.
  With or without P0 connectors.

VXI
For Enquiry Contact Us

VXI

Features :

  Fully conforms to VXIbus specification.
  12 Layer stripline construction.
  Tightly controlled characteristic impedance.
  On-board passive termination.
  Auto bus grant connectors fitted as standard.
  Differential tracking and line length equalization techniques utilized to minimize signal skew on all high speed lines.
  On-board socketed ECL buffers for CLK10 & CLK100 distribution.
  High speed decoupling capacitors positioned between termination networks.
  Exposed ground plane area to facilitate RFI grounding of plug-in modules.
  Additional decoupling capacitor positions provided between each connector slot to facilitate fine tuning of the      system.
  High power versions available.

Specifications :

  Board Thickness 5.35mm (0.21”)
  Connector Pitch 6HP (30.48mm/1.2”)

Environmental :

  Temperature range (storage): -40deg.C to +120deg.C.
  Temperature range (working) : -20deg.C to +85deg.C.
  Altitude 3000M.
  Humidity 90% R.H. non-condensing.
  Shock and vibration resistance exceeds ETS 300-019-2-5.
  MTBF to MIL-HBK-217E >225,000 hours.
  Conditions: Ground benign, temperature @ 25deg.C.
  Rapid decompression Exceeds DEF STAN 00-35 test CL9 class F(4).
  Safety assessment (3rd party) EN60950.

VPX
For Enquiry Contact Us

VPX

Features :

  Compliant to the latest VITA 46 and VITA 65 standards.
  Various slot widths.
  3U or 6U standard Eurocard formfactor.
  Hybrid versions available on High speed, multi-gig connector.
  High performance, low noise.

VXS
For Enquiry Contact Us

VXS

Features :

  Compliant to the latest VITA 41 Standards.
  Various slot widths.
  6U standard Eurocard formfactor.
  Hybrid versions available.
  High speed, multi-gig connector.
  High performance, low noise.

Compact PCI
For Enquiry Contact Us

Compact PCI

Features :
The below Backplane variants complying to Compact PCI specifications / standards are available:

  CompactPCI – Core (PICMG 2.0 Rev.3).
  Packet Switching (PICMG 2.16).
  Computer Telephoney (CT/H.110).
  CompactPCI Plus I/O (PICMG 2.3).
  CompactPCI Serial (PICMG cPCI-S.0).

PXI
For Enquiry Contact Us

PXI

Features :

  Compliant to PXI Revision 2.2.
  Compliant to PICMG 2.0 Revision 3.0.
  Hot Swap compliant to PICMG 2.1 Revision 2.0.
  3U & 6U versions, 4-18 slots wide.
  8-14 Layer PCB.
  32/64Bit, 33/66MHz clock.
  10MHz clock driver on backplane.
  Standard and custom versions available.
  Rear pallet PXI bridge for higher slot counts (straight CPCI female connectors for bridge, plugged on the extended pins      of the front CPCI P1 & P2 connectors).
  High performance, low noise.
  Controlled characteristic impedance @ 65/75ohms.
  Matched trace length for PXI_CLK10 and PXI_STAR signals.
  24-Way latchable service header for DEG, FAL, PRST signals & remote voltage sense for +5v, +3.3v, +/-12v.

Customized Backplanes

Our design expertise in the area of backplane technology and best in class facilities enables us in manufacturing broad range of customized interconnect products, providing great flexibility in the design of custom backplanes. The backplanes are carefully crafted & developed as per customer specifications.

Below are some of the Backplanes custom developed for our prestigious Indian defense customers.

Customized 10 Slot Backplane

Customized 10 Slot Backplane

Customized 6 Slot Backplane

Customised 6Slot Backplane

Customized 6 Slot Backplane

Customised 6Slot Backplane

All Rights Reserved To Hi-Rel, Bangalore.
Site by Websmartindia